Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.llmgrid.ai/llms.txt

Use this file to discover all available pages before exploring further.

​
Overview

The Cost Tracking section allows administrators to customize how usage costs are calculated and reported. It supports applying percentage-based discounts to provider costs and validating how those discounts affect the final calculated usage. All changes are applied automatically and reflected across usage, budgets, and analytics.

​
Cost Tracking Tabs

The Cost Tracking screen is organized into two tabs:
  • Provider Discounts
  • Test It
Each tab focuses on a different aspect of cost configuration and verification.

​
Provider Discounts

The Provider Discounts tab is used to define discount percentages that are applied to provider usage costs.

​
Add Provider Discount

Select Add Provider Discount to configure a discount.

​
Provider

Select a provider from the dropdown list.
The drop-down dynamically reflects available providers.

​
Discount Percentage

Set a discount value between 0% and 100%. This value represents the percentage reduction applied to the provider’s base cost.

​
Discount Rules

  • Discounts apply after the base provider cost is calculated
  • Discount values must fall between 0 and 100
  • Multiple providers can have different discount rates
  • Changes are saved automatically once applied

​
Cost Calculation Logic

Discounts are applied using the following formula: final_cost = base_cost × (1 - discount_percentage / 100)

​
Example

If a request has a base cost of 10.00 and a discount of 5%:
final_cost = 10.00 × (1 - 0.05) final_cost = 9.50

​
Valid Discount Range

  • Minimum: 0%
  • Maximum: 100%
Values outside this range are not accepted.

​
Validating Discounts

To confirm that discounts are applied correctly, you can send a test request and inspect the response headers.

​
Example Test Request (cURL)

curl -X POST http://api.llmgrid.ai/chat/completions \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer <your-api-key>" \
  -d '{
    "model": "<model-name>",
    "messages": [{ "role": "user", "content": "Hello" }]
  }'